C-squared Oxygen Analyzer Manual Instrukcja Użytkownika Pobierz pdf (Strona 2)

Oxygen Analyzer Instruction Manual Page 2

C-Squared Inc. 1440 S State College Blvd, Unit 4L, Anaheim, CA 92806

Tel: (714) 999-2791, Fax: (714) 999-2928, [email protected], www.c-squaredinc.com

Air Calibration:

Calibration is essential prior to every use. For oxygen mixtures above 50% oxygen always

calibrate in 100% oxygen before use. This assures minimum deviation and greatest accuracy.

For regular use expose the analyzer to clean room air and adjust the calibration knob until the

display reads 20.9%.

The analyzer is now ready for oxygen measurement.

WARNING:

The analyzer is sensitive to oxygen partial pressure. Calibration must always be carried

out at the same pressure as the oxygen measurement.

Oxygen Calibration:

Obtain the 100% oxygen from a certified Distributor and measure the gas using a 100 ml to

500 ml per minute flow rate. Be sure to allow the reading to stabilize.

Operation:

The Oxygen Analyzer comes complete with a sensor flow cap/restrictor that allows you to read

directly from a cylinder valve. For the external sensor Oxygen Analyzer the sensor cable plugs

into the right side of the Analyzer and has a secured mini-phone jack that connects to the

sensor securely.

You should check the calibration with 100% oxygen periodically and adjust as necessary. If for

any reason the Analyzer does not calibrate within specifications the oxygen sensor should be

1 2 3 4

Brak uwag

C-squared Oxygen Analyzer Manual Instrukcja Użytkownika Strona 2